Shippensburg Pump Co, Company

A Durable condensate unit with Cast iron receiver for pumping water temperatures up 200°F. A standard cast iron receiver is provided with a standard 20-year warranty against corrosion failure for years of service. Units are floor-mounted style and designed for capacities from 1,000 to 100,000 sq....

A small Economical Condensate Pump unit for pumping water temperatures up 210°F with low NPSH pump requirements. A stainless steel, axial flow impeller (often referred to as a propeller or inducer) directs the suction flow of condensate into the eye of the impeller to minimize pump cavitations. A...

Steel Horizontal Vacuum and Condensate unit with independent air and water pumps. Multi-jet design proven effective and reliable for removing air and lifting hot condensate in the return system. A standard heavy gauge black steel receiver from 3/16" to 3/8" thick provided for years of services....

Big Vacuum and Condensate unit with independent air and water pumps. Multi-jet design proven effective and reliable for removing air and lifting hot condensate in the return system. A standard cast iron receiver is provided with a standard 20-year warranty against corrosion failure for years of...

A multi-stage, centrifugal, bronze-fitted, available in either horizontal or vertical design. Pump typically used for applications with flows up to 500 GPM and pressures up to 340 psig. Pump types (such as 129 AW, 221 AWF, etc.) selected depend on the design operating conditions—flow rate,...

A single-stage, centrifugal, bronze-fitted design for applications with temperatures typically 200°F or less. However, higher temperatures are possible depending on specific operating conditions. Pump types (such as 106-D, 110-D, etc.) selected depends on the design operating conditions—flow rate,...

A regenerative, turbine pump design that is horizontal style. Pump typically used for applications with low flows and high pressures. Pump types selected depend on the design operating conditions—flow rate, discharge pressure and NPSH requirements.

A single-stage, centrifugal, bronze-fitted, horizontal design. Pump is fitted with a threaded suction enabling pump to be used for in-line applications such as chilled water systems, cooling towers, circulators, washer and booster, etc. Pump types (such as 110-H, 116-H or 127-H) selected depends on...

A two-stage, centrifugal, bronze-fitted design for applications requiring low NPSH. The pump is fitted with an axial flow propeller (sometimes called an inducer) and straightening vanes that provide the necessary NPSH for pumping high temperature water without cavitation occurring. Pump types (such...

Atmospheric deaerators are recommended for low-pressure boiler applications. The standard .03 design removes dissolved oxygen to a maximum level of .03 cubic centimeters per liter of feed water. The amount of hot condensate returns influences which design is most appropriate for applications. A...